Basic coatings where to buy

Part No: B Brand: Basic Coatings. Product Description Basic Coatings IFT Intensive Floor Treatment Agressive Wood Floor Cleaner comes in a 1-gallon jug and removes build-up left behind by some wood floor cleaners and lifts heavy layers of dirt and grime from urethane coated hardwood floors. IFT dilutes with water for cleaning hardwood floors and is applied to the floor with dampened clean towels or a wet mop and bucket or in an autoscrub machine.

It is important to limit the amount of water on the wood floor by wringing the towels or mop thoroughly and lifting excess water immediately after cleaning. Forgot your password? Log in. New Here? Registration is free and easy! Faster checkout Save multiple shipping addresses View and track orders and more Create an account. Appalachian Barlinek DuChateau Kahrs. Caulks Grouts Mortars Surface-Preparation. The fastest curing finish on the market, Basic Coatings StreetShoe is the industry benchmark for waterbased wood floor finishes.

Notify Me. With HyperTone Stains, there are endless possibilities for creativity, and this gallery is 1 way to get started for ideas. Click here to learn more about HyperTone Stains. Now you can digitally view all 14 standard colors and over 25 additional colors that can be achieved with HyperTone Stains!

Click here to learn more about HyperTone Stains and its first-of-its-kind formulation. Or, click here to contact us with questions and for more information. Pin holes are blemishes on the surface of floor finish that form when the film pulls back from a small area of the floor surface. This forms tiny indents that look like pins pierced the wood floor. The finished floor appears to look and feel uneven, ruining the overall appearance.

Many causes of pin holes stem from applying the finish too thick. If coats of finish are applied too thick, film builds up and solvents are not allowed to escape. It will not dry properly, forming these indents. Additionally, if the first coat of finish is not dry enough before the second coat is applied, the conditions are perfect for pin holes to form. Applying the finish in high temperatures is also a potential cause. Temperature can influence dry time because it can dry the finish too fast.

If the finish does not dry as recommended by the manufacturer, it can cause pin holes or similar issues. Read more to learn about finish problems in warm temperatures. Some pin holes are naturally part of the wood being used for a wood floor. Most hardwood flooring manufacturers only allow a specific number of pinworm holes because too many will cause moisture problems with the wood.

Pin holes can also refer to other wood characteristics like nail holes and open grain. To prevent pin holes from forming, follow all finish manufacturer recommended directions when applying floor finish.

Understand how much finish is needed to coat a floor and how much time is needed for the finish to dry properly. Know the recommended maximum and minimum temperatures to apply finish and be sure the environment is between those temperatures. Make sure the finish is also not too warm or too cold as well.

Once pin holes form, repairs to the wood floor are needed. Scrape and recoat the floor using the proper applicator with the correct spread rates, both recommended by the manufacturer. Prior to recoating the affected areas, use an abrasive and scraper with the appropriate grit sequence to remove any pin holes from the floor. Once they are gone, refinish the floor. Check with the manufacturer for recommended repairs.

With fast dry times, more coats are able to be applied in a day.